A bike that is looked after rides better, lasts longer and costs less to run. Basic maintenance is not complicated: clean the chain, keep the tyres pumped, check the brakes, and fix a puncture when it happens. This guide covers the jobs worth doing yourself and the tools you need for them.
Learn the basics and your bike will repay you. Cleaning, pumping and puncture repair cover most of what a bike needs, and they take minutes. Leave gears and wheels to a shop until you are confident, because a bad adjustment costs more than a service.
Best for
Riders who want a quiet, reliable bike without shop visits.
Anyone who rides in wet weather, where cleaning matters most.
Watch out for
Riding with worn brake pads or a dry, rusty chain.
Over-tightening bolts, which can damage parts.
Cleaning the bike
Cleaning is the foundation of bike maintenance, because a clean bike is easy to inspect and the parts last longer. After a wet or muddy ride, rinse the frame and wheels with water, wipe the chain with a rag, and dry the bike before putting it away. Mud left on the bike traps moisture against the metal, which speeds up rust and wear.
You do not need special equipment. A bucket, a sponge, an old toothbrush for the chain and cassette, and a rag are enough. Avoid high pressure hoses, which can force water into bearings where it does damage. A gentle wash, done regularly, is better than a deep clean done rarely.
Looking after the chain
The chain is the hardest working part of the bike, and it wears out faster than anything else. A clean, lightly oiled chain runs quietly and shifts smoothly. A dry chain squeaks, a dirty chain grinds, and both wear out the chainrings and cassette far sooner than they should. Wipe the chain with a rag after wet rides, then apply a drop of lubricant to each link and wipe off the excess.
Chains stretch as they wear, and a stretched chain wears the rest of the drivetrain with it. A chain checker is a cheap tool that tells you when the chain is worn, and replacing the chain on time saves the cost of a new cassette. Most regular riders replace the chain once or twice a year.
Tyres and punctures
Check tyre pressure before each ride, because soft tyres puncture more easily and make pedalling feel heavy. The pressure range is printed on the sidewall of the tyre, and a track pump with a gauge makes the job easy. Pump the tyres to the pressure that suits your weight and the road: higher for smooth tarmac, lower for rough surfaces.
Fixing a puncture is the one repair every rider should learn. Remove the wheel, lever one side of the tyre off the rim, pull out the tube, find the cause of the puncture, fit a new tube, and pump it up. Practise at home first, so the first time you do it is not on a wet roadside in the dark. Carry a spare tube, tyre levers and a pump on every ride.
Brakes: checking and adjusting
Brakes are safety equipment, so check them before every ride. Squeeze each lever and make sure the brake bites firmly well before the lever reaches the handlebar. Look at the pads: if they are worn down to the metal or the grooves have gone, replace them. Rim brake pads should meet the rim squarely, not rub the tyre or miss the rim edge.
Disc brakes need less frequent adjustment, but the pads wear too, and a squealing disc brake often means the pads are contaminated or worn. Brake adjustments are simple on rim brakes and a little more involved on discs. If you are unsure, ask a shop, because brakes are not the place to learn by trial and error.
Gears: what to check, what to leave alone
Gears that shift cleanly need little attention beyond a clean chain and a check that the cables are not frayed. If shifting becomes slow or noisy, the cause is usually a dirty chain, a worn cable or a bent hanger. Cleaning the chain fixes the first, and a shop can fix the other two quickly.
Adjusting gears yourself is possible, but the limit screws and cable tension are easy to get wrong. A small mistake can throw the chain into the spokes, which is expensive. Learn to recognise when gears need attention, and let a shop make the adjustment until you are confident. A yearly service covers gears, brakes and bearings in one visit.
A clean chain, pumped tyres and working brakes are most of what a bike needs. The rest is checking early, before small wear becomes a big bill.
Bolts and bearings
Check the main bolts now and then: the stem, the handlebars, the saddle clamp, the seat post and the wheels. They should be firm but not forced. A multi tool with the right Allen keys covers most of them, and a torque wrench is worth having if you work on carbon parts, where over-tightening can crack the material.
Bearings in the wheels, headset and bottom bracket should spin smoothly without play or grinding. If the handlebars feel notchy when you turn them, or a wheel wobbles side to side, the bearings may need attention. These are shop jobs for most riders, because they need special tools and the right grease.
The tools worth owning
A home tool kit starts with a track pump, a set of Allen keys, tyre levers, a chain cleaner and some lubricant. A multi tool covers roadside fixes, and a chain checker tells you when the chain is worn. That kit handles most home maintenance, and it costs far less than a single shop service.
Add tools as you learn new jobs. A cassette tool and chain whip let you change a cassette, and a torque wrench lets you work on carbon safely. There is no need to buy a full workshop at once. Buy the tool when you have the job to do, and the kit grows with your skills.
When to use a bike shop
Use a shop for anything you are unsure about, for annual servicing, and for jobs that need special tools. A yearly service checks the gears, brakes, bearings and wheels, and it catches wear before it becomes a problem. It is also the right place for wheel truing, headset work and bottom bracket replacement.
A good shop will also show you how to do the basic jobs yourself. Ask questions, watch what they do, and take the advice. Our guide to where to buy cycling gear explains how to choose a shop, and our guide to cycling gear puts maintenance in the wider picture of what to buy first.
Clean the bike after wet rides, oil the chain, pump the tyres and learn to fix a puncture. Those four habits cover most of bike maintenance, and they keep a bike running quietly and reliably for years.