UK SPORTS SHOPS Find Kit

Home / Cycling Shoes

Cycling Shoes

Cycling shoes are built around one job: moving power from your legs to the pedals without wasting it. Stiff soles spread the load across the foot, and many shoes clip into the pedals with cleats. This guide explains the types, how they should fit, and when they are worth buying.

The Verdict

Cycling shoes are worth buying once you ride regularly and your feet ache on longer rides. Start with flat pedals and trainers if you are new, then move to clip-in shoes when the rides get longer. Fit and sole stiffness matter more than brand or weight.

Best for

Regular riders who want less foot ache on longer rides.

Anyone moving from flat pedals to a clipped-in setup.

Watch out for

Shoes that pinch the toes or squeeze the sides of the foot.

Buying cleats and pedals that do not match each other.

Why cycling shoes are different from trainers

Trainers are built to bend. That is good for walking and running, but on a bike a bending sole wastes effort and concentrates pressure under the ball of the foot. After an hour or two that pressure turns into hot spots and aching feet. Cycling shoes use a stiff sole that spreads the load, so the whole foot shares the work and the ache arrives much later, if at all.

The upper is different too. Cycling shoes fasten with dials, straps or laces that hold the foot firmly in place, so the foot does not slide around inside the shoe. That firm hold matters because the foot pushes and pulls with every pedal stroke. A shoe that moves on the foot blurs the connection to the pedal and can rub.

Road shoes

Road shoes are the lightest and stiffest option, built for tarmac riding. They use a three-bolt cleat that locks into road pedals, and the soles are smooth, which makes walking awkward. That is the trade off: road shoes are excellent on the bike and poor off it. They suit riders who clip in at the start of a ride and clip out at the end, with little walking in between.

Road shoes usually fasten with one or two dials, which let you adjust the fit while riding. The dials tighten a wire that pulls the upper evenly around the foot. Cheaper road shoes use Velcro straps instead, which work well but are harder to adjust on the move. Either way, the shoe should feel like an extension of the foot, not a tight box.

Mountain bike shoes

Mountain bike shoes use a two-bolt cleat that sits inside a treaded sole, so you can walk normally when you step off the bike. The tread grips on mud and rock, and the recessed cleat does not click on hard floors. That makes them the practical choice for riders who mix riding with walking, or who stop at cafes and shops mid-ride.

Mountain bike shoes work on road bikes too, and many commuters choose them for exactly that reason. They are heavier and slightly less stiff than road shoes, but the difference is small for most riders. If you only buy one pair of cycling shoes, mountain bike shoes are the flexible choice, because they work on and off the bike.

Flat pedal shoes

Flat pedal shoes look like trainers but have a grippy rubber sole that sticks to flat pedals. They do not clip in, so you can put a foot down instantly. That makes them the right choice for new riders, for city riding with frequent stops, and for anyone who finds clipping in stressful. They are also the shoes to wear on a mountain bike on technical ground, where quick foot placement matters.

The grip comes from the rubber compound and the tread pattern, not from straps or laces. A flat pedal shoe with a soft, sticky sole holds the pedal well in the wet as well as the dry. They are also the easiest cycling shoes to walk in, because they are built like normal shoes with a stiffer sole.

How cycling shoes should fit

Cycling shoe fit is snugger than trainer fit. The heel should stay put when you walk, the midfoot should feel held, and the toes should have room to spread slightly. Feet swell on long rides, so a shoe that feels perfect in the shop can feel tight after two hours. Try shoes on in the afternoon, when feet are at their largest, and wear the socks you will ride in.

Get the width right as well as the length. Many brands offer wide versions, and a wide foot in a standard shoe will ache no matter how good the sole is. If the shoe pinches the sides of your foot, try a wide fit before going up a size, because a longer shoe that is still too narrow solves nothing. Our guide to cycling shoe sizing covers sizes and half sizes in more detail.

The right cycling shoe disappears on your foot. If you are thinking about your shoes during a ride, the fit is wrong.

Cleats and pedals: matching the system

Cleats and pedals work as a pair, and the two must match. Road cleats use three bolts and fit road pedals. Mountain bike cleats use two bolts and fit mountain bike pedals. A road shoe cannot take a two-bolt cleat, and a mountain bike shoe cannot take a three-bolt cleat, so the choice of shoe decides the choice of pedal. Check the sole of the shoe before buying either.

Cleats wear out and need replacing, usually once or twice a year for regular riders. Worn cleats feel loose in the pedal and can release without warning, so check them when you clean the bike. Replacing cleats is a simple job with an Allen key, and marking the position of the old cleat before removing it keeps the new one in the same place.

When to buy cycling shoes

Buy cycling shoes when you ride often enough that foot ache limits your rides, or when you want the secure feeling of being clipped in. For most new riders that point comes after a month or two of regular riding. Before that, flat pedals and trainers are fine, and the money is better spent on a helmet, lights and padded shorts.

When you do buy, budget for pedals and cleats as well as the shoes, because the three come as a system. A shop can fit the cleats and set the pedals up, and a first ride in a quiet place is the sensible way to practise clipping in and out. Our guide to cycling gear for beginners puts shoes in the wider buying order.

Looking after cycling shoes

Cycling shoes last longer with simple care. Let them dry naturally after wet rides, away from direct heat, and stuff them with newspaper to hold their shape. Brush mud off the soles and cleats before it dries hard. Check the fastenings now and then, because a dial or strap that works loose mid-ride is annoying at best.

Soles wear slowly, but uppers wear faster where straps rub and where the shoe meets the pedal. A shoe that is comfortable and still stiff is fine to keep using, even if it looks scruffy. Replace shoes when the sole flexes, the upper tears, or the fit changes because the shoe has stretched out of shape.

Start with the riding you do, choose the shoe that matches it, and get the fit right before anything else. A well fitting pair of cycling shoes makes every ride more comfortable, and that comfort is what keeps you riding week after week.